High Speed Centrifugal Spray Dryer
Min.Order : 5 Pieces Quick Quotation >
Item Details
Product Description
Product Description
High Speed Centrifugal Spray Dryer Working Principle
The filtered and heated air is rotationally entered in tangent direction and uniformly distributed inside the drying tower after diffusion by air distributor ,filtered liquid material is pumped into the centrifugal atomizer located on the top of drying chamber, under the effect of high speed rotation centrifugal force of atomizing disc, liquid material forms a thin film o the surface of atomizing disc, which is diffused to the outlet of nozzle and cracked to small fog drop that touches hot air with large surface area, with the moisture content being evaporated speedily, liquid material is dried into granula products in an extremely short time. Dry products are collected at the bottom of tower and inside the cyclone separator, and the dust air is vented after filtration by bag collector.
High Speed Centrifugal Spray Dryer Process Flow Chart
Cleaner: According to features of material, bag collector or wet spraying dust cleaner can be used as 2nd phase dust cleaning equipment.
Heating: Steam, electricity or heat air furnace heating can be selected as heat source according to factory conditions and allowed temperature of the material.
High Speed Centrifugal Spray Dryer Technical Parameters
Model | NLP-5 | NLP-25 | NLP-100 | NLP-150 | NLP-300-2000 | NLP-5000 |
Air intake temperature | 300 | 300 | 300 | 300 | 300 | 300 |
Air vent temperature | =70 | =70 | =70 | =70 | =70 | =70 |
Moisture evapration capacity | 5 | 25 | 50 | 150 | 300-2000 | 5000 |
Driving type of centrifugal atomizer | Compressed air movement | Mechanical movement | ||||
Highest speed rpm | 25000 | 18000 | 18000 | 15000 | 12000 | 10000 |
spraying disc | 50 | 120 | 120 | 150 | 180-240 | 300 |
Installed power | 5 | 10 | 22 | 30 | >50 | >150 |
Floor space m2 | 2 | 7 | 12 | 22 | >30 | 100 |
Application of High Speed Centrifugal Spray Dryer
Plastics assistants, polymer, direct dyestuff, active dyestuff, acid dyestuff, organic dyestuff, catalyst, ferrite, whitener, herbicide, pesticide, dextrin ,soy milk powder and leather assistants.
Drying material:
A: Chemical industry: sodium fluoride (potassium), basic dye pigments, dye intermediates, compound fertilizers, formaldehyde silicas, catalysts, sulfuric acid, amino acids, such as white carbon black.
B: Plastic resin: AB, ABS emulsion, urea formaldehyde resin, phenolic resin, plastic (urea) formaldehyde resin, polyethylene, polyvinyl chloride and so on.
C: Food industry: fat-rich milk, prion, cocoa milk, milk substitute, hunting powder, egg white (yellow) and so on.
D: Food and plants: oats, chicken juice, coffee, instant tea, seasoning spices meat, protein, soy, peanut protein, hydrolyzate and so on.
E: Sugar: corn syrup, corn starch, glucose, pectin, maltose, potassium sorbate and so on.
F: Ceramics: Alumina, Tiles, Magnesia, Talc, etc.
High Speed Centrifugal Spray Dryer Quick Details
Condition: New
Type: Spray Dryer
Place of Origin: Wuxi, China (Mainland)
Brand Name: NANFANG
Model Number: NLP
Material: Stainless steel
Voltage: 220V,380V,440V
Certification: CE,ISO9001
After-sales Service Provided: Engineers available to service machinery overseas
Color: As your requirement
Technical service: Provide
Application:Chemical industry, plastic resin, food industry, food and plants, sugar, ceramics and so on.
Heating fuel: Electricity,coal,fuel
Drying material: Plastics assistants, polymer, direct dyestuff, active dyestuff, acid dyestuff, organic dyestuff, catalyst, ferrite, whitener, herbicide, pesticide, dextrin ,soy milk powder and leather assistants.
Payment term: TT, LC
Packing: Standard export packing
Delivery date: Negotiable
Warranty: 1 year
MOQ: 1 set
High Speed Centrifugal Spray Dryer Process Features:
1. High drying speed.
2. Size ,bulk density and moisture content of product can be adjusted.
3. Simplified process flow.
4. Large unit production capacity.
Our Advantages
1. We can make the machine based on the customer request .
2. For the material for the machine ,we have several kinds of raw material for choice Such as SUS304 ,316L , carbon steel as well as others .
3. For the heating source for the machine , we can make it based on the available facility at customer site ,such steam ,electricity ,gas-furnace and so on.
4. For the motor , we have more choices , such ABB,SEW,Siemens and so on .
5. Our machine we can design with explosion proof , dust -free, water-free , sealed circulating .
6. We provide the spare parts with the cost of the spare parts themselves for lifelong time .
7. Guarantee /warranty :1year calculating from the day of successful installation and commissioning.
8 .Package : wooden packing . Special fumigation -free wooden material . Or according to customer requirement .
Our Services
Pre-sale service
Act as a good adviser and assistant of clients to enable them get rich and generous returns on their investments.
1. Introduce the product to the customer in detail, answer the question raised by customer carefully;
2.Make plans for choice according to the needs and special requirements of users in different sectors;
Sale service
1. Ensure product with high quality and pre-commissioning before delivery;
2. Delivery on time;
3.Provide full set of documents as customer’s requirements.
After-sale service
Provide considerate services to minimize clients’ worries.
1.Assist clients to prepare for the first construction scheme;
2.Install and debug the equipment;
3.Train the first-line operators;
4. Examine the equipment;
5.Take initiative to eliminate the troubles rapidly;
6.Provide technical support;
7.Establish long-term and friendly relationship.
Service commitment
1. Provide clients one-year warranty to make sure the machine work well;
2.We always keep certain inventory level of spare parts, which means the replacements can be sent to you timely;
3.Send every client a preferential quotation.
Special Notice:
In order to quota you the right high speed centrifugal spray drying equipment with best price, we would like to get the following information include in your inquiry:
-What is the raw material? Material related characteristic? Does it corrosive, strong basicity, or highly acid? Please confirm.
-What is the capacity per hour you need (kg/h)?
-What is the initial moisture and final moisture of finished products you require to get?
-What about the maximum heat temperature of raw material?
-What kind of fuel you use to heat the dryer? Natural gas, electricity, fuel oil or steam?
-Which equipment material do you like prefer? SUS304, SUS316L or Carbon steel?
-Provide us your country’s electricity information, such as phases, voltage, HZ?
-How about dust collect requirements?
-Other special requirements?
FAQ
1. Q: Can I visit your factory?
A: Yes. Many domestic and international customers visit our factory every year. Our company is near Shanghai.It only takes you about 1 hour to get Wuxi.Or we can visit you in Shanghai.
2. Q: What’s the quality of your products?
A:Parts of our products come with best quality, and our products passed CE certification, exported to lots countries around the world, such as Australia, Malaysia, Indonesia, Vietnam, Philippines, Korea, Brazil, Argentina, Russia, South Africa, etc. You can rest assured with the quality absolutely.
3. Q: What to do if the machine has a problem?
A:24 hours timely response of mail and phone calls. If the parts broken belong to non-artificial factors within 12 months, we offer free replacement. If beyond 12 months, customers should bear the freight back and forth and accessories cost.
4. Q: How long is the warranty of your equipment?
A: Our warranty period is one year generally.
5. Q: What is your payment term?
A: Our usual payment term is: 30% TT in advance, 70% TT before shipment. Other ways can also be received after we both sides discussion and agreement.
6. Q: Does your price include freight?
A: Our usual price is based on FOB Shanghai, if you request CIF, please give us your delivery port, and we will give you CIF price.
Payment & Shipping
More Product
Recommend Product